Sensitivity: 3.94mV/mm/s (100mV/in/s) ±5%.
Frequency response: 3.0Hz to 900Hz (180 to 54,000cpm) ±1.0dB; 1.5Hz to 1.0kHz (90 to 60,000cpm) ±3.0dB.
Temperature sensitivity: -8% to 5% typical over the operating temperature range.
Velocity range: 63.5mm/s pk (2.5in/s pk), vibration components beyond 10g pk, significantly reduced above 1kHz.
Lateral response: less than 5% axial sensitivity.
Amplitude linear: ±2% to 63.5 mm/s pk (2.5 in/s pk).
Installed resonant frequency: 9kHz, minimum (except bolt-on, quick disconnect).
Output bias voltage: 10.1Vdc±1.0Vdc, pin A is referenced to pin B.
Dynamic Output Impedance: < 400Ω typical.
Wideband noise floor: (1.5Hz to 1kHz) of 0.229mm/s (0.009in/s)pk.
Basic strain sensitivity: 0.43 mm/s/μstrain (0.017 in/s/μstrain).
Operating temperature: -40°C to 85°C (-40°F to 185°F).
Storage temperature: -40°C to 100°C (-40°F to 212°F).
Impact limit: 5000 grams.
Humidity limit: 100% condensing, non-submerged.
Magnetic field susceptibility: < 0.0068mm/s/Gaussian (0.268mil/s/Gauss) at 50-60Hz.
In addition, with a mounting face diameter of 33 mm (1.3 in.), a height of 8.2 cm (3.2 in.), and a weight of 0.297 kg, the sensor features a MIL-C-5015 connection interface and is suitable for measuring housing vibration velocities in cooling towers and air-cooled heat exchanger fans with rotational speeds equal to or greater than 90rpm