Input and output:
Sensor Inputs: Four sensor inputs are available, and the software is configurable to support 2- and 3-wire accelerometers, speed sensors, or proximity sensors.
Temperature inputs: There are four temperature inputs, supporting E, J, K, and T thermocouples, as well as two- or three-wire RTDs.
Relay outputs: With six relay outputs, the user can use the 1900 configuration software to configure the relay contacts to open or close depending on the channel status.
Logger Outputs: Four 4-20mA logger outputs that provide data for any variable on any channel on any recorder output.
Buffered Output: A dedicated buffered output that provides a signal for each sensor input.
Communication Capabilities:
Communication protocols: Ethernet/IP, Profinet, Modbus communication via Ethernet and software-configurable RS232/485 serial ports are also supported.
Configuration: Users can configure module network parameters, such as IP address, subnet mask, etc., through the software interface. Profiles can be created using software running on a laptop or PC and downloaded to the monitor via the built-in Ethernet connection.
Conversion accuracy: 24-bit ADC conversion enables high-precision data acquisition.
Set point: It has independent alarm and hazard set point, which can be set according to actual needs.
Event logging: With a 200-item event list, relevant event information can be recorded for troubleshooting and system analysis.
Physical parameters: The weight is about 2.5KG, and the dimensions are roughly 202530cm.