Electrical parameters:
Input signal: Accept signals from one to four proximity, acceleration, or velocity sensors.
Axis power supply: -24Vdc.
Sensor power supply: -24Vdc.
Resolution: 0.3662A/bit.
Output impedance: 550 ohms output impedance, absolute output impedance 300 ohms.
Measurement parameters:
Measurable items: Through programming with 3500 framework configuration software, radial vibration, axial displacement, differential expansion, eccentricity can be measured REBAM、 Acceleration, velocity, absolute shaft vibration, acceptable circular range, etc.
Measurement range: vibration ± 5mm; speed 0 to 20m/s; Acceleration from 0 to 10g.
Frequency response: 2Hz to 10kHz.
Accuracy: Gap and direct measurement filtering are not included within 0.33% of full range; 1X and 2X are within 0.33% of the normal maximum value of 1% at full scale; Differential expansion and thrust are within 0.33% of full-scale accuracy.
Signal processing parameters:
Radial vibration filter: User programmable direct filter, single pole, -3db, 4Hz to 4000Hz or 1Hz to 600Hz, 1% accuracy; Gap filter 0.09Hz, -3dB; The non-1X filter is a constant Q notch filter with a minimum suppression of -34.9dB in the stopband, ranging from 60cpm to 15.8 times the operating speed; Smax varies between 0.125 and 15.8 times the operating speed; The 1X and 2X vector filters are constant Q-value filters with a minimum stopband suppression of -57.7dB.